8
TP12KSC-DX
July 2018-A
1. PRODUCT INFORMATION
1.1 Product Description
The TP12KSC-DX 2-post hydraulic lift is a surface mounted, frame contact lift incorporating the latest safety
technologies. Designed and manufactured for a lifting capacity of 12,000 lbs. (Max 3,000 lbs. per Lifting Arm)
and is fully capable for lifting vehicles, vans, light & heavy trucks by safely holding them in an elevated position.
The TP12KSC-DX incorporates symmetric swing arms for symmetrical lifting configuration.
The TP12KSC-DX 2-post hydraulic lift consists of a fixed
structural unit (Crossbeam, Columns & Uprights), the
mobile units (Carriages and Lift Arms), and the Hydraulic
Power System and mechanical Safety Latch Release
device
.
A. Crossbeam
B. Column
C. Carriage
D. Lifting Arm
E. Power Unit
F. Overhead Safety Shut-Off Bar
G. Single Point Safety-Latch Release
H. Upright (column extension)
1.2 Technical Data
Capacity
12,000 lbs. (
Max 3,000 lbs. per Arm)
Height Overall
168-1/2”
Width Overall w/ Power Unit
151-5/16”
Max Lifting Height
75”
Max Lifting Height w/ Tallest Adaptor
80”
Width Between Columns
122”
Min Pad Height
4-7/8”
Drive Thru Clearance
109”
Swing Arm Reach – Min / Max
37-5/8” – 57”
Electrical Power
220V, 20 Amp, 1 Phase
Max Operating Pressure
3,050 PSI
