14
TP12KC-DX
Jun 2017
B. Install the overhead beam to the connection plates on each end with 8ea nuts & bolts, as shown
below in Fig.4.
Fig. 4
ENSURE TO POSITION OVERHEAD LIMIT SWITCH BOX ASSEMBLY ON SAME SIDE AS
THE MAINSIDE COLUMN WITH POWER UNIT.
C. Attach the shutoff bar and switch housing to the underside of the overhead beam. Attach single
bolt and bar first, then install switch housing.
Fig. 5
D. Run electrical cord for overhead limit switch into the hole on the underside of cross beam and back
out of the column using provided bulk head fittings.
7. Install Air Actuator Cylinders for Safety Latches
A. Locate offside air cylinder and insert 6mm hose into PTC fitting, as shown below in Fig. 6.
Fig. 6
