Measuring AC ( ) or DC ( ) Current (Amps)
*Note: When measuring AC voltage
, Ghost or stray voltages (caused by
induced voltages coupling from one parallel conductor to the next as found when
measuring one conductor in multiple conductor circuits) may cause an incorrect
value. Selecting the Low impedance position (LoZ) on the dial, (see inset above)
while measuring voltage with the 61-757 will defeat the influence of Ghost or Stray
voltage.
14
Measuring AC ( ) or DC ( ) Voltage
AC V LoZ Setting*
Note:
• When measuring current, align conductor with dash marks on clamp jaws.
• For DC current point the arrow (located at base of jaws) towards the load.
