1
2
3
4
5
6
LABEL FORMAT
1
Single Line
2
Single line Plus
3
Double Line Plus
4 Character max each
port
Top line 30 character
max. 4 character max.
each port
5 character max. each
line each port
Wire Information
AWG
Insulation
Mil Spec
Stripping Comments
1
2
3
4
5
6
Comments
Ordering Blades and Wire Guides
Due to varying manufacturing techniques, standard wire gauge sizes have begun to indicate “nominal” wire sizes and no longer indicate conductor
diameters accurately. Therefore, in order to maintain accurate precision wire stripping, IDEAL requests that exact mil spec. information for the types of
wire and insulation you will be stripping be provided to IDEAL when ordering blades and wire guides.
IDEAL also requests wire samples when ordering. If an IDEAL Custom Stripmaster™ Wire Stripper® hand tool is currently being used to strip the par-
ticular wire please specify the blade number being used with each wire type and size.
Due to varying outside diameter dimensions on every wire, IDEAL recommends ordering multiple wire guide bushings to match a given wire.
Depending upon wire tolerances, it may be necessary to order a wire guide one size larger and one size smaller than supplied with the machine. Guides
are easily interchanged to match varied wire size
When ordering, please specify the preferred face plate location and number designation for each blade/guide set.
For larger wire sizes (e.g. 10 AWG, 12 AWG, 14 AWG) blade location is preferred in the center ports of the machine.
Specification Chart Instructions
List the wire size, insulation type and mil. spec. per each wire size and type for which you are ordering stripping blades and wire guides under the
location/s (1 thru 6) you prefer.
Indicate numerical wire gauge legends (10 thru 30) or any identification you wish to appear above each corresponding air guide/blade configuration.
(Choose and complete the desired label format below. 1, 2 or 3)
Note: For better stripping results, locate 10, 12, 14 gauge wires nearest to center ports.
12
Summary of Contents for Stripmaster 950
Page 1: ...45 950 45 954 45 950 1 Stripmaster Model 950 Model 954 Wire Stripper...
Page 14: ...Notes...
Page 15: ...Notes...
