8
REF (Reference) continued
• Press the and buttons to move left and right through
the reference value to select the appropriate digit to be
changed.
• The + and – buttons will increase or decrease the value of
the blinking digit.
• The actual measurement will be displayed in the upper right
display while in the REF function.
• Pressing the F4 button until the will save the reference value
and exit the REF function.
Setup
• Pressing F1 while the
Ο
indicates row F4 enters and exits
the setup mode.
• The parameters within the setup menu are:
A. 1 bEEP – Turns the beeper on or off
B. 2 A.P.O. – Sets the time for auto power off (in minutes)
C. 3 b.LitE – Sets the time for auto back light off (in
minutes)
D. 4 HAZ – Set hazard detect function on or off
E. 5 L.FrEq – Set power line frequency to 50 or 60Hz
F. 6 LoAd – Set the dBm load in the dBm mode
G. 7 rESEt – Resets all setup parameters except power line
frequency setting back to factory default settings
• Press the and buttons to move left and right through
the parameters of the setup menu.
• The + and – buttons change the values of the selected setup
parameter.
• To exit the setup menu without saving changes to the menu
parameters, press the blue button.
• Turning the meter off does not affect changes to the setup
menu.
➔
➔
➔
➔
ND 2352-1 61-633 630 Series Ins 12/22/04 9:49 AM Page 8
