Used batteries should be disposed of according to the applicable provisions of law.
HANDLING
Before start-up fix a shield (1).
Do not switch on the shaver when the shield (1) is loose.
Note. The appliance does not operate in case the shield is fixed in an improper man-
ner.
The shaver starts when you switch the switch (4) to position “1” or “2” - you can select two ope-
rating speeds. Move the shaver along clothes laying on a flat surface. In order to switch a unit off
slide the switch (4) into „0” position.
GUIDELINES
Do not shave clothes in case clothes are at a body. It may cause wounds on a body.
Before use try the unit on a hidden part of a cloth.
When shaving clothes pay special attention to:
- areas around buttons and zips,
- protruding parts,
- connections – sews,
- object glued to clothes,
- delicate parts.
Move the unit acc. to a pattern on a cloth.
If required move the unit alongside – vertically and horizontally.
In case of ‘flat ‘materials lay two layers of a cloth and shave them on an iron board.
Do not switch the unit on when it is unnecessary, it may result in reduced life of the shield and
the blade.
MAINTENANCE AND CLEANING
• When the container is approx. 80% full clean it and internal blades as well.
• Before cleaning unplug the unit and switch it off.
• Do not merge the unit in water.
• To not use abrasive or other damaging cleaning agents.
• Clean the casing with a wet cloth.
• Remove the casing (1) twisting it counterclockwise.
• Remove the blade (2).
• Using a little brush (7) clean the casing, blade and the drive mechanism.
• Empty the container (6).
• Be careful then removing and cleaning the blade (2) since it is sharp
• Be gentle when cleaning the metallic foil of the casing (1). Do not press it.
WARRANTY
This appliance is designed for domestic use only.
It cannot be used for professional purposes or for other than the intended use.
Improper use will nullify the guarantee.
