CHANGING THE BATTERIES IN
YOUR HALO CONTROL
A red, empty battery symbol means that your
Halo batteries need to be replaced.
Whether you have a desk or wall mounted unit
you will see the battery symbol on the base of
the unit. There are also two finger grabs top and
bottom as shown below. Use the finger grabs to
gently pull the Halo away from the rear housing.
1
2
9
1
menu
Sat, 17 Nov
mode
auto
9:33pm
0
5
target temp
until 10:00pm
current room
temp
Synchronisation to smart interface
in progress, please wait
0%
1
2
9
1
menu
Sat, 17 Nov
mode
auto
9:33pm
0
5
target temp
until 10:00pm
current room
temp
Remove all the old batteries and replace with
4 new AA Alkaline batteries. Check you have the
correct battery orientation then position the Halo
back onto the rear housing and gently push into
place until you feel a positive click.
The Halo will go through a short synchronisation
process while it reconnects with your Halo Smart
Interface. The Halo will then return to the home
screen.
