background image

APPLICATION  

GUIDE

2021-14B - Exalt Application Book

229024 A02

January 3, 2022

Exalt FSB 110-155-199 & FSB Combi 155-199

•  This document is intended to be used by 

a factory trained and qualified heating 

contractor or service technician only. Read 

all Instructions within this document and 

within the relevant Boiler Installation and 

Maintenance Manual before proceeding. It 

is recommended to follow the procedures 

in the steps given. Skipping or missing 

procedural steps could result in substantial 

property damage, serious injury, or death. 

•  To maintain the safety & longevity of your 

appliance, read and follow the  Installation 

and Maintenance Manual prior to installation.

•  If the information in this manual is not 

followed exactly, a fire or explosion 

may result causing substantial property 

damage, serious injury, or death.

FOR YOUR SAFETY

•  

Do not store or use gasoline or other 

flammable vapors and liquids in the 

vicinity of this or any other appliance.

• WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance
-  

Do not touch any electrical switch; 

 

do not use any phone in your building.

-  Immediately call your gas supplier from 

a neighbor’s phone. Follow the gas 

supplier’s instructions.

-  If you cannot reach your gas supplier, 

call the fire department.

 

WARNING

•  This manual is applicable to all Exalt floor standing 

boilers with display software version 0.40 or later.

•  If this guide does not apply to your boiler, Please 

visit idealusa.com to obtain the correct application 
guide.

•    Customer must register unit within thirty (30) days 

of installation in order to gain warranty coverage. 
See Warranty Card for details.

•  Leave all documentation received with appliance 

with the owner for future reference.

    NOTICE

Summary of Contents for Exalt FSB 110





















Reviews: