Exalt
Application Guide
5
2. Flexible Pump Configuration
This allows the installer to customize the flexible Pump
Output (relays) to a specific installation arrangement
that is not addressed in the Preset Pump Configuration
options. There is a total of four Pump Output(relays) that
must be set.
1. To access the Installer screen, touching simultane-
ously the up and down soft keys for 3 seconds as
shown in Fig. 9.
Fig. 9: Installer Button
2. Enter the installer access code “054” by using the
LEFT
and
RIGHT
buttons to select a digit and the
UP
and
DOWN
buttons to change the digit. Press
the OK button to enter the access code.
ENTER INSTALLER
ACCESS CODE
[0]XX
Fig. 10: Installer Access Code
3. Press the OK button while the
CH & DHW Settings
icon is highlighted.
Fig. 11: CH & DHW Settings
4. Press the OK button while the
Boiler Settings
icon
is highlighted.
Fig. 12: Boiler Settings
5. Press the OK button while the
Pump Settings
op-
tion is highlighted.
Fig. 13: Pump Settings
6. Press the OK button while
Flexible Pump Config
option is highlighted.
Fig. 14: Flexible Pump Config
