IDEAL AP 100 Operating Instructions Manual Download Page 38

Page: 38 / 40

- 76 -

AP 100

Product Specifications

Model Name

AP 100

Power Voltage

AC 120V, 60 Hz

Power Rate

200 W

Siutable for room

sizes up to

697,5 sq. ft.

Weight

68,3 lb

Dimensions

21,1 inch (W) x 21,0 inch (D) x 44,8 inch (H)

Authorized representative for technical documentation

MBM Corporation

3134 Industry Drive

North Charleston, SC 29418

800-223-2508

www.mbmcorp.com

01.04.2016

Date

Subject to technical modifications.

Made in South Korea

Safety instructions

- If the supply cord is damaged, it must be replaced by a special cord or assembly

available from the manufacturer or its service agent.

- This appliance is not intended for use by person (including children) with

reduced physical sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- To reduce the risk of electric shock, this equipment has a polarized plug (one

blade is wider than the other). This plug will fit in a polarized outlet only one

way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not

fit, contact qualified personnel to install the proper outlet. Do not alter the plug

in any way.

- RISK OF ELECTRIC SHOCK – These servicing instructions are for use by qualified

personnel only. To reduce the risk of electric shock, do not perform any

servicing other than that contained in the operating instructions unless you are

qualified to do so.

Product Specifications

| Other

Summary of Contents for AP 100









































Search results

Summary of Contents for AP 100

Reviews:

Related manuals for AP 100

Brands by name

Popular brands

IDEAL AP 100, Operating Instructions Manual

Search results

Summary of Contents for AP 100

Reviews:

Related manuals for AP 100

Brands by name

Popular brands