- 32 -
IDEAL 4860 ET
1.
2.
A
3.
2.
A
1.
Lower the blade by pressing both cutting
buttons (
1.
). Keep one button pressed and
turn off the main switch (
2.
).
With the special wrench (
A)
the 3 eccentrics
should be screwed down (
3.
)until the paper is
cut along the entire length of the blade
(The blade must remain parallel, not too deep
into cutting stick).
•
Blade and cutting stick replacement
•
Tighten the blade screws (
A
) on the right hand
side.
Turn main switch to position "I" (
1.
). Blade will
return to upper position. Tighten the blade
screws (
2.
) firmly.
