15
16
Low Battery and Battery Replacement
Replace the battery as soon as the low battery indicator
appears to avoid false readings. Refer to the following figure
to replace the battery.
Caution
Remove test leads from the Meter before opening the battery
cover or meter case.
9V Battery
Battery Cover
Screw
Specifications
General Specifications
Maximum voltage applied to any terminal:
1000 Vac rms or 1000 Vdc. rms
Display:
6000 counts.
Polarity Indication:
Automatic, positive implied, negative indicated.
Overrange Indication:
OL
Battery Life:
150hours ALKALINE Battery (No Backlight)
Low Battery Indication:
Voltage drops below operating voltage, will flash.
Power Requirement:
9V battery
Auto Power Off:
20 minutes.
Operating Temperature:
-10 ~10°C
10°C ~ 30°C (<80% RH),
30°C ~ 40°C (<75% RH),
40°C ~ 50°C (<45%RH)
CAT Application to Field
I
The circuits not connected to mains.
II
The circuits directly connected to Low-voltage installation.
III
The building installation.
IV
The source of the Low-voltage installation.
N12966
Storage Temperature:
-20°C to 60°C , 0 to 80% R.H. (batteries not fitted)
Temperature Coefficient:
0.15 x (Spec.Accy) / °C, < 18°C or > 28°C .
Measure:
Samples 3 times per second.
Altitude:
6561.7 ft (2000m)
Safety Certification:
Complies with EN61010-1,
UL61010-1, IEC 61010-1, CAT IV 600V, CAT III 1000V
Double Insulation
Instrument has been evaluated and complies with insulation
category IV (overvoltage category IV). Pollution degree 2 in
accordance with IEC-644. Indoor use.
Compliance to EN 61557:
IEC61557-1, IEC61557-2,
IEC61557-4, IEC61557-10
Weight:
460g (including battery)
Dimensions (W x H x D):
94mm x190mm x 48mm with holster.
Accessories Included:
9V Battery (installed), Test leads
(TL-484) and user manual.
EMC:
EN 61326-1
Shock vibration:
Sinusoidal vibration per
MIL-PRF- 28800F (5 ~ 55 Hz, 3g max.)
Drop Protection:
4 ft. drop onto hardwood over concrete
floor.
