11
12
MIN/MAX
The MAX/MIN mode records the min. and max. input values.
When the input goes below the recorded min. value or above
the recorded max. value, the meter records the new value.
Press Hold button to pause the recording.
Peak HOLD (61-486 only)
In the Peak Hold function ,the meter records the peak min.
value and the peak max. value when the inputs goes below
the recorded peak min. value or above the recorded peak
max. value ,the meter records the new value . Press Hold
button to pause the recording.
Press
button over 1 sec.
to exit this function
Min. Reading
Max. Reading
Present Reading
Press
button over 1 sec.
then exit this function
Min. Reading
Max. Reading
Press
2 sec.
Present Reading
Smart HOLD
The meter will beep continuously and the display will flash
if the measured signal is larger than the display reading by
50 counts. (However, it cannot detect across the AC and DC
Voltage /Current).
VoltSense
Keep the VoltSense button down to activate the VoltSense
function.
Caution
The number of dashes displaying on the display indicates the
electric field intensity. If no indication, voltage could still be
present. Always verify with leads.
