background image

E.  PAIRING OF THE HALO

The Halo unit now needs to be paired with the Smart Interface installed in the boiler. 

Ensure the Halo Smart Interface is in pairing mode and the Zigbee LED is flashing red.

1.   After the batteries are inserted, the Halo will 

power up automatically. 

2.  The device will prompt pairing with the Halo 

Smart Interface using an easy step-by-step 

process.

3.  Simply follow the on screen guide to select 

the type of boiler and number of zones. In 

this case select Combi boiler and single zone.

4.  The Halo screen will show “Pairing in 

Progress”, then “Synchronisation in Progress”  

and then “Pairing Complete” when the Halo 

has successfully connected to the Smart 

Interface.

5.  The device will automatically prompt set up 

of the time and date.

6.  There is the opportunity to add an installer 

contact phone number into the device at this 

stage, if not changed this will default to the 

Ideal Boilers Customer Service number.

7.  The home screen will be displayed showing 

the current and target temperature and the 

temperature bar. The Zigbee communication 

icon will also be visible on the display.

8. 

Press and hold

 the Pair button on the Halo 

Smart Interface until the Zigbee LED goes 

from flashing red to solid green.

Pairing to smart interface in 

progress, this could take a little 

while

1

2

9

1

menu

Sat, 17 Nov

mode

auto

9:33pm

0

5

target temp 

until 10:00pm

current room 

temp

1

2

9

1

menu

Sat, 17 Nov

mode

auto

9:33pm

0

5

target temp 

until 10:00pm

current room 

temp

Zigbee icon

Summary of Contents for 222142

















Reviews: