5
General Assembly Instructions.
• Remove all packaging materials from the bike.
• Lift locking pin and join the hinge tightly together. Fold the main
frame hinge so the bicycle comes together at full length.
( for folding frame ). Note this may be done already depending on
how it is packaged.
• Release locking pin so pin drops firmly into the hinge assembly.
• Now lift the quick release lever into the v slot (As shown)
and close ensuring the lever is locked down firmly.
• This is critical to ensure the safe operation of the bicycle.
• Lift the handle bar to the upright position to lift the locking clip arm to
lock it place. Again this needs to be checked
for complete firmness and accuracy. (As shown on page 6)
• Ensure when adjusting the saddle it is not raised higher than the
minimum insertion point clearly marked on the seatpost.
• Check and re check for tightness.
