30
Assemble the shower valve to
the adaptors remembering to
ensure that the sealing washers
or filters are inserted between
the adaptors and the shower
valve inlets.
The hose from the shower kit should
be connected to the shower outlet
located on the underside mixer body.
Ensure hose seal is in place.
Turn on the water supplies, ensure that there are no leaks. The mixer installation is complete
The shower kits are supplied with their own fitting instructions, next step is to position & install the
appropriate shower kit.
8
6
7
13
1/2“
When the sealant has set, fit the covers
by screwing them onto the adaptors
until they are flush with the wall.
The covers only need to be hand tight.
Note: Ceratherm T25 range is supplied
with conical wall escutcheons. Other T
ranges have cylindrical escutcheons.
Screw the brass adaptors over the
pipes into the plastic brackets. 36mm
A/F Spanner flats are provided, hand
tightness is adequate.
Fit the olives to the pipes prior to
screwing the two 3/4“ connectors into the
wall mount plate using a 1/2“ allen key.
The connectors will have to be secu-
rely screwed in to form the necessary
compression joint between the olive, wall
plate and connector.
Retain the brass adaptors with a spanner
when making the compression joints.
NOTE FOR IRELAND: 15mm olives are
supplied with this product. Use 1/2”
olives if 1/2” supply pipes are fitted.
9