Page 5 of 17 5/11/2012
1. TO CHANGE PASSWORD
a.
Enter factory pre-set password 0-0-0. Press
PROG
button once (1),
PASSWORD
will flash on the auto-dialer screen. (Fig.5)
b.
Press the
ARM/DISARM
button to confirm that you want to enter the
PASSWORD.
c.
Enter your new password then press the
ARM/DISARM
button to confirm
(you can choose from 3 to 6 digits for your password).
d.
Press the
PROG
button nine (9) times to exit set-up mode.
NOTE
:
PASSWORD RESET
If you forget your password, open back of unit and locate the
RESET
button (Fig.5a).
Press and hold the
PROG
button,
and
, press and release the reset button once. The
screen will go blank. When screen returns let go of the
PROG
button. You now have
the factory pre-set password of 0-0-0. This will reset the password
ONLY
, all other
information will remain (programmed telephone numbers and learned sensors)
2. SETTING THE TIME (YEAR / MONTH / DATE / HOUR / MINUTES)
a.
Enter password followed by
PROG
button nine (9) times.
b.
will flash on the auto-dialer screen.
c.
Press
ARM/DISARM
button to confirm.
d.
The date will show on the auto-dialer screen as five sets of numbers: year, month,
and date followed by the time hour and minutes (24hr time clock). The first set of
numbers will flash confirming that these can now be changed.
e.
Enter correct year by pressing
*/UP
or
#/DOWN
button, then press the
ARM/DISARM
button. The next set of number will start flashing, enter the
month by pressing
*/UP
or
#/DOWN
button, then press the button
ARM/DISARM
, and so on until all numbers have been entered. You will now
have the correct date and time.
