UniPRO
152810
User Guide
Page 53
Auto test
MGig1 can be set up to run a predefined range of
tests when the yellow Autotest button, found on the
front of the handset, is pressed. The range of tests
is set from TESTS>AUTOTEST>SETUP by ticking
the check boxes next to your choice. Fig 78 refers.
Select APPLY (F3) to save your choices and a
screen showing the selected tests is shown on the
display with a ready symbol adjacent to each test,
Fig 78
Fig 79
Select RUN (F1) and the tests will start. MGig1 will
decide in which order to run the tests.
When all tests are complete, select any of the tests
from the screen to view the results. To save the
results, press the Escape key to exit to the Tests
screen and then select SAVE ALL (F3).
Summary of Contents for UniPRO MGig1
Page 1: ...UniPRO MGig1 User Guide 152810 Iss 1 UniPRO SEL1 ...
Page 67: ......
