UniPRO
152810
User Guide
Page 51
Service setup screen
Frame size
can be set in the ways that follow:
Select Frame Size and choose from the dropdown
list. When a specific size, such as 64, is selected,
that size will be used for all frames transmitted on
that service. Select User or MTU and specify your
own size between 60 and 10,000 bytes. EMIX will
generate and transmit a variety of frame sizes
throughout the test duration. The default EMIX
Pattern is ‘abceg’ and is shown in Fig 71. The
characters are designators for the frame sizes listed
in the table shown on the screen. Select ‘EMIX
Pattern’ and you may add or subtract from the
pattern using the appropriate designators.
CIR
Set CIR for the service.
EIR
Set EIR for the service. Values entered here
are ignored for subtests A1 & A2.
Pattern Data
Enter up to eight hexadecimal
characters.
Color Mode screen
Select the Color Mode from the drop down list – IP,
VLAN or MPLS dependent on where network
priority for EIR should be. Now set a value for both
the Green and Yellow indicators by selecting the
data entry box next to the color – For IP select the
COS Type and Precedence, or DSCP Mode and
Class in accordance with the SLA and select
APPLY (F3).
For VLAN and MPLS set a value from 1 to 7.
Limits screen Fig 73.
The values entered here should be those found in
the SLA.
Set the Frame Loss Ratio from
0 to 1 (3 decimal places).
Set the Frame Transfer Delay from
0 to 10,000,000.
Set the Frame Delay Variation from
0 to 2,000,000.
Set Availability from 0 to 100%.
Fig 71
Fig 72
Fig 73
Summary of Contents for UniPRO MGig1
Page 1: ...UniPRO MGig1 User Guide 152810 Iss 1 UniPRO SEL1 ...
Page 67: ......
