IDEAL INDUSTRIES OTDR Technical Manual Download Page 18

Page: 18 / 123

Safety Information

IDEAL

Laser Safety Information (Units with VFL)

Laser Safety Information (Units with VFL)

Your instrument is a Class 3R laser product in compliance with standards
IEC 60825-1 Amendment 2: 2001 and 21 CFR 1040.10. It is potentially
harmful in direct intrabeam viewing.

The following label(s) indicate that the product contains a Class 3R source:

Electrical Safety Information

The AC adapter/charger provided with this unit (14.4 W/9 V) is specifically
designed to work with your IDEAL OTDR.

ARNING

Use the AC adapter/charger indoors only.

Any other AC adapter/charger or power source
(for example, car outlet) must output at least 12 W.

Affixed to back

(under the stand)

Indicated on

connector panel

Summary of Contents for OTDR




























































































































Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands

IDEAL INDUSTRIES OTDR, Technical Manual

Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands