IDEAL INDUSTRIES OTDR Technical Manual Download Page 76

Page: 76 / 123

Managing Test Results

IDEAL

Transferring Results to a Computer

To transfer files or folders between your unit and a computer:

If it is not already done, install Microsoft ActiveSync 4.1 or later
(available from the installation CD).

Follow the instructions given on the screen.

Connect the provided USB cable to the computer (type A connector)
and your unit (type B connector).

Note:

The computer and your unit do n

ot need

to be off when you connect the

cable.

MPORTANT

You must install Microsoft ActiveSync on the computer you want to
use with your OTDR. Otherwise, you will not be able to transfer
data.

Before connecting your unit to a computer, you must install the
required software on the computer. For more information on the
installation, refer to the Release Notes on the installation CD.

Summary of Contents for OTDR




























































































































Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands

IDEAL INDUSTRIES OTDR, Technical Manual

Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands