2. DESCRIPTION OF THE EQUIPMENT
2.1. Designations and scope
ECOMOD AHP60:
Heat pump comprising a close-coupled heat pump
Hot water production system for heating networks or thermodynamic production of
domestic hot water.
2.2. Packaging
Outdoor unit
Model
Code
ECOMOD 50
AH090921
ECOMOD 70
AH090924
ECOMOD 50 AC*
AH090922
ECOMOD 70 AC*
AH090925
ECOMOD 50 D**
AH090923
ECOMOD 70 D**
AH090926
*AC: Anti-corrosion treated
** D: Ducted version
Outdoor unit accessories
Model
Code
Set of anti-vibration supports (pack of 4)
092040
Other accessories according to connection - see Ecomod Heat Control manual, heating application
or DHW application.
The evaporator for the AC version is treated against corrosion. The heat pump's performance may
be affected by this by up to 2% in relation to the values communicated in chapter 2.4.1
2.3.
Definitions
Change to monobloc heat pump : to be installed outdoors only for heating and/or domestic hot
water application .
air/water : The outdoor air is the energysource. This energy is transmitted to the primary water
circuit by the heat pump.
inverter : The fan and compressor speeds are modulated to suit the heat requirements which
allows the noise level to be reduced. This technology makes it possible to save energy by avoiding
high starting currents and by adjusting the power to the load.
COP (coefficient of performance)
: instantaneously, this is the ratio between the energy transmitted
to the heating circuit and the electrical energy consumed.
DHW : Domestic hot water
CAUTION:
The minimum admissible temperature for the storage of the units is 5°C.