12
CAUTION:
Make sure to select the minimum power level that will achieve the intended results.
The maximum power setting presents increased risk of thermal damage relative to the lower
settings.
Position the handpiece onto the patient at the first point of exposure. Make sure the skin is
still coated with the treatment oil.
CAUTION:
Ensure that the handpiece is in direct contact with the skin prior to starting the
treatment. Air gaps between the handpiece and the tissue may result in an electric shock.
Remind the patient that they may experience a warming sensation during the treatment,
and advise them to indicate if the handpiece feels unbearably hot during the treatment. With
everything prepared, press the Start button on the screen to begin the treatment.
During treatment, the Stop button will be present on the screen. The Time indicator will start counting
down. The device will emit a beep every 10 seconds during countdown. If you need to interrupt treatment
for any reason, or need to lift the handpiece to treat a different area, press the Stop button. Reposition
the handpiece as needed, then once the handpiece is in contact with skin again press the Start button
to resume the treatment. The unit will continue counting down time where you left off. If you stop the
treatment early, and then press the Standby button to return to the Standby screen, the time will reset to
the full amount of time you had selected.
CAUTION:
Do not lift up the handpiece during treatment. Stop the procedure first before lifting up the
handpiece. Do not touch the patient with your hands while the handpiece is active.
When 15 seconds remains in the treatment time, the unit will start to beep once a second indicating the
treatment is almost over. Once the timer reaches 0, the unit will automatically deactivate the handpiece
and the system will show the Ready screen. The time will reset to the total that you had originally selected.
Once the treatment is ended, you can lift up the handpiece.
Media Screen
From this screen you can access a number of tutorial videos that
demonstrate use of the Ultimate Contour and address some fre-
quently asked questions. You can also find an electronic version
of this Owner’s Manual for the Ultimate Contour. Press on any of
the buttons to launch the video, or view the manual. When done
viewing the video or manual, press the Back button at upper left
to return to the Media Screen.
Utilities Screen
Here you can adjust the volume of the sounds made by the
Ultimate Contour unit. Simply press the Volume button to cycle
through the available volume levels. This screen also provides
contact information for Ideal Curves in case of questions, as well
as the software revision information for the Ultimate Contour.
Summary of Contents for Ultimate Contour
Page 1: ......