8
Clean all filters
Turn on FAN function until
unit dries out completely
Turn off the unit and
disconnect the power
Remove batteries
from remote control
Check for damaged wires
Clean all filters
Check for leaks
Replace batteries
Make sure nothing is blocking all air inlets and outlets
• Before changing the filter or cleaning, turn off the
unit and disconnect its power supply.
• When removing filter,
DO NOT
touch metal parts in
the unit. The sharp metal edges can cut you.
•
DO NOT
use water to clean the inside of the indoor
unit. This can destroy insulation and cause
electrical shock.
•
DO NOT
expose filter to direct sunlight when
drying. This can shrink the filter.
AIR FILTER REMINDERS (OPTIONAL)
AIR FILTER CLEANING REMINDER
After 240 hours of use, the display window on the
indoor unit will flash “CL.” This is a reminder to
clean your filter. After 15 seconds, the unit will
revert to its previous display.
To reset the reminder, press the LED button on
your remote control 4 times, or press the MANUAL
CONTROL button 3 times. If you don’t reset the
reminder, the “CL” indicator will flash again when
you restart the unit.
AIR FILTER REPLACEMENT REMINDER
After 2,880 hours of use, the display window on
the indoor unit will flash “nF.” This is a reminder
to replace your filter. After 15 seconds, the unit
will revert to its previous display. To reset the
reminder, press the LED button on your remote control
4 times, or press the MANUAL CONTROL button
3 times. If you don’t reset the reminder, the “nF”
indicator will flash again when you restart the unit.
• Any maintenance and cleaning of outdoor unit
should be performed by a licensed service provider.
• Any unit repairs should be performed by a
licensed service provider.
MAINTENANCE – LONG PERIODS OF NON-USE
If you plan not to use your air conditioner for an
extended period of time, do the following:
MAINTENANCE – PRE-SEASON INSPECTION
After long periods of non-use, or before periods
of frequent use, do the following:
CAUTION
CAUTION
