background image

9

SAFETY PRECAUTIONS

If ANY of the following conditions occurs, turn off your unit immediately!
•  The power cord is damaged or abnormally warm.
•  You smell a burning odor.
•  The unit emits loud or abnormal sounds.
•  A power fuse blows or the circuit breaker frequently trips.
•  Water or other objects fall into or out of the unit.

DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AUTHORIZED SERVICE 

PROVIDER IMMEDIATELY!

COMMON ISSUES

The following problems are not a malfunction and in most situations will not require repairs.

TROUBLESHOOTING 

Issue

Possible Causes

Unit does not turn 
on when pressing 
ON/OFF button

The Unit has a 3-minute protection feature that prevents the 
unit from overloading. The unit cannot be restarted within 
three minutes of being turned off.

The unit may change its setting to prevent frost from forming 
on the unit. Once the temperature increases, the unit will start 
operating in the previously selected mode again.

The set temperature has been reached, at which point the 
unit turns off the compressor. The unit will continue operating 
when the temperature fluctuates again.

The indoor unit 
emits white mist

In humid regions, a large temperature difference between the 
room’s air and the conditioned air can cause white mist.

Both the indoor 
and outdoor units 
emit white mist

When the unit restarts in HEAT mode after defrosting, white 
mist may be emitted due to moisture generated from the 
defrosting process.

The unit changes 
from COOL/HEAT 
mode to FAN 
mode

Issue

Possible Causes

The indoor unit 

makes noises

A rushing air sound may occur when the louver resets its 

position.

A squeaking sound may occur after running the unit in HEAT 

mode due to expansion and contraction of the unit’s plastic 

parts.

Both the indoor 

unit and outdoor 

unit make noises

Low hissing sound during operation: This is normal and is 

caused by refrigerant gas flowing through both indoor and 

outdoor units.

Low hissing sound when the system starts, has just stopped 

running, or is defrosting: This noise is normal and is caused by 

the refrigerant gas stopping or changing direction.

Squeaking sound: Normal expansion and contraction of 

plastic and metal parts caused by temperature changes during 

operation can cause squeaking noises.

The outdoor unit 

makes noises

The unit will make different sounds based on its current 

operating mode.

Dust is emitted 

from either the 

indoor or outdoor 

unit

The unit may accumulate dust during extended periods of 

non-use, which will be emitted when the unit is turned on. 

This can be mitigated by covering the unit during long periods 

of inactivity.

The unit emits a 

bad odor

The unit may absorb odors from the environment (such as 

furniture, cooking, cigarettes, etc.) which will be emitted 

during operations.

The unit’s filters have become moldy and should be cleaned.

The fan of the 

outdoor unit does 

not operate

During operation, the fan speed is controlled to optimize 

product operation.

Operation 

is erratic, 

unpredictable, 

or unit is 

unresponsive

Interference from cell phone towers and remote boosters may 

cause the unit to malfunction.
In this case, try the following:

• 

Disconnect the power, then reconnect.

• 

Press ON/OFF button on remote control to restart operation.

NOTE:

 If problem persists, contact a local dealer or your nearest customer service 
center. Provide them with a detailed description of the unit malfunction as 
well as your model number.

 

Summary of Contents for 700021

















Reviews: