Manual IB-RD3621-C31
3. 2.5" or 3.5" DRIVE INSTALLATION
Note!
Before installing the hard drive, please disconnect the power plug from the outlet. It may cause electric shock accident
or malfunction. When connecting the hard drive, please note the electrostatic! Body‘s static electricity may cause mal-
function of the device. Please touch a metal object to discharge or wear antistatic gloves before the operation.
Attention!
PCB of this device and HDDs are precision machinery, please be careful do not collision and
please notice the direction of HDD
Be careful the cutting edge inside may cut hand!
If hard disk already contains data, please backup data
before
installation to prevent data loss.
1.
Detach the screws on the rear side. Slide the cover out to the back and then pull it up.
2.
3.5"
drive
2.5"
drive
2.1
Install the 3.5" drive gently
2.2 Firstly the 2.5" bracket must be installed on the 2.5" drive
as shown below and then into the main body!
