E
Manual IB-DK2408-C
3. Connect your peripherals to the appropriate interfaces on the dock.
4. Switch on the device
Power button function
To power ON: Push the ON/OFF button for less than 1 sec and the dock turns on.
Both the DockingStation and your connected notebook should now be powered.
To power OFF: Push the ON/OFF button for more than 3 sec and the dock turns off.
Configure a display device
Please set up your display settings according to your operating system and your requirements.
For detailed information, consult the corresponding computer manual and description of your operating system.
Note:
Video output capabilities are dependent on the graphics card and hardware specifications of your
connected host notebook. Certain graphics cards and operating systems have limited MST support, while some
monitors will also limit the maximum resolution.
Supported video resolutions
The DockingStation supports 4K Ultra HD resolution if the connected HDMI
®
/ DisplayPort™ display and the
graphics unit supports it.
Usage of memory card slots
SD card (UHS-I)
Insert the SD card into the SD card slot with the bevelled corner first. The golden PIN’s of the card must show upwards.
microSD card (UHS-I)
Insert the microSD card into the microSD card slot with the bevelled corner first. The golden PIN’s of the card must
show downwards.
Single-LUN - the card reader can only work with one memory card at a time
