Manual IB-180MC-C31
Installation
ATTENTION
! When installing or uninstalling the M.2 SSD, make sure that the IB-
180MC-C31 is always switched off (press ON/OFF button, power LED lights up red) or
disconnected from the host computer to avoid data loss.
1.
Install the rubber fixation to your required position (42/60/80 mm): Put the
rubber fixation through the large hole and push it into the smaller area of the hole
HINT
: If you use an M.2 NVMe SSD please use the heat sink for optimal cooling of
your installed M.2 SSD.
•
Install a thermal pad on your M.2 SSD. Make sure that all foils are removed first.
Put the aluminium heat sink on the thermal pad on the M.2 SSD.Fix the assembly
with both rubber rings provided.
2.
Put the M.2 SSD to the M.2 socket in an angle of about 30°.
42
60
80