TITAN ELITE CEILING & WALL MOUNT INsTALL
TITAN ELITE INSTALLATION - 09/01/16 pjm
Page 2 of 4
MONITOR TILT, ROTATION & ADJUsT MONITOR DEPTH
MONITOR TILT
& ROTATE
Gently hold sides
of monitor. Tilt and
rotate to desired
position with ball
VESA.
ADjUsT
MONITOR
DEPTh
Loosen the
adjustment
knob, move
the Paralink
forward or
back, then
re-tighten
the knob.
Adjustment
Knob
ATTACH VEsA (PARALINk)
Attach VESA to
monitor using
four 4mm screws
in the hardware
bag.
Mount the VESA
assembly by
screwing the
knob through
the rail into the
VESA.
Attach Monitor - Paralink
Attach Keyboard Tray
IF ATTACHING TO ULTRA FLIP-UP
IF ATTACHING TO PARALINk
ATTACH FLIP UP
•
Remove screws from
drop extension using
5/32” hex key.
•
Align holes in keyboard
tray with screw holes in
drop extension.
•
Attach keyboard tray
using the provided
screws.
ATTACH PARALINk
•
Remove beauty cap on
Paralink.
•
Remove screw using 3/16”
hex key.
•
Slide keyboard tray into
Paralink.
•
Replace screw and tighten.
•
Replace beauty cap.
Beauty cap
Screw
Attach the Paralink
Keyboard Mount to the
Monitor Mount by using
the 3/8-16 screw and
lock washer provided.
ATTACH PARALINk kEYBOARD TO MONITOR
ADJUsT BALL VEsA TENsION & HEIGHT
Pivot tension
adjustment screws
Use the slider knob
to loosen the slider
to adjust the height
of the monitor on the
Paralink.
Adjust the pivot tension
of the ball by gently
and evenly tightening
or loosening the four
screws on the back of
the ball VESA.
Slider knob
