Enabling better global research outcomes in soil, plant & environmental monitoring. 20
8.1.2 SD Card Logging Options
Probe Selection.
Inner and Outer is the default option and will record both
measurement points. Inner Only and Outer Only are intended to be used in
small stems where both measurement points are not within the plant.
Calculated Results.
Available parameters are:
Raw Heat Pulse Velocity
Sap Velocity
Sap Flow in kg
All of these are logged by default.
Diagnostic Temperature Data
records the max temperature, average
temperature rise, and temperature ratios during the heat pulse measurement.
This is not enabled by default but can be useful when troubleshooting
measurement options.
Power Management
. Available parameters are:
Internal Battery
External Supply
These record the status of the internal battery and external power supply. Both
are enabled by default, and ICT International strongly recommends logging
Internal Battery and External Supply as this is useful for troubleshooting and
diagnostic purposes.
Raw Temperature Mode, number of measurements/second
and
Raw
Temperature Mode, number of measurements after the pulse.
These are
used in Needle Temperature Mode. Contact ICT International for more
information.