Enable Dual LED Mode
By default tSec Readers are operate in single LED mode (when wired in Wiegand configuration). To enable dual
LED mode, you need to change its configuration. For more information, see
1.
Log in to the ICT Encoder Client using your secure operator login.
2.
Select the required
Customer
.
3.
Right click the
Reader Configuration
component and create a
New Config
called
Dual LED Mode
.
4.
Click
Add
and select the
LED Mode
option.
5.
Set the
LED Mode
to
Dual LED Operation
, then click
Ok
.
6.
Save
your configuration.
7.
Right click your new
Dual LED Mode
config and click
Encode
.
8.
Place your blank MIFARE Classic card on the desktop encoder.
9.
Click
Write Config
and wait for the '
programming success
' message.
You can now apply the configuration to the required reader(s). Power cycle the reader, and within two minutes
place and hold the
Dual LED Mode
config card close to the reader.
Set Wiegand Output Mode
By default, tSec Readers are configured to output Wiegand data. However, if the reader is ever connected to a
reader expander configured to use RS-485, the reader will switch into RS-485 communication mode. If you want
to use the reader's Wiegand output again, you need to change its configuration.
1.
Log in to the ICT Encoder Client using your secure operator login.
2.
Select the required
Customer
.
3.
Right click the
Reader Configuration
component and create a
New Config
called
Wiegand Output Mode
.
4.
Click
Add
and select the
Output/Interface Mode
option.
5.
Set the
Interface Mode
to
Wiegand Output
, then click
Ok
.
6.
Save
your configuration.
7.
Right click your new
Wiegand Output Mode
config and click
Encode
.
8.
Place your blank MIFARE Classic card on the desktop encoder.
9.
Click
Write Config
and wait for the '
programming success
' message.
You can now apply the configuration to the required reader(s). Power cycle the reader, and within two minutes
place and hold the
Wiegand Output Mode
config card close to the reader.
PRX-TSEC Range | tSec Multi-Technology Card Reader with Bluetooth® Technology | Installation Manual
23