Enable CSN Reading Mode
By default, tSec Readers will read ICT secured formats from high frequency cards. However, for lower security
sites using third-party cards it can be useful to read and send the Card Serial Number (CSN) instead.
WARNING: The CSN of your MIFARE card can be read and duplicated by anyone with access to the card. It is
not recommended to use CSN reading on high security sites.
1.
Log in to the ICT Encoder Client using your secure operator login.
2.
Select the required
Customer
.
3.
Right click the
Reader Configuration
component and create a
New Config
called
CSN Reading Mode
.
4.
Click
Add
and select the
Card Serial Number Reading
option.
5.
Select all the appropriate CSN Reading options to enable, then click
Ok
.
6.
Save
your configuration.
7.
Right click your new
CSN Reading Mode
config and click
Encode
.
8.
Place your blank MIFARE Classic card on the desktop encoder.
9.
Click
Write Config
and wait for the '
programming success
' message.
You can now apply the configuration to the required reader(s). Power cycle the reader, and within two minutes
place and hold the
CSN Reading Mode
config card close to the reader.
PRX-TSEC Range | tSec Multi-Technology Card Reader with Bluetooth® Technology | Installation Manual
24
