Outputs
The keypad has 5 programmable outputs. These outputs are used to control the system status indicators, system
beeper and the open collector output. The outputs can be activated and deactivated based on specific events or
functions within the Protege System.
Output
Function
KPXXX:01
Open collector output on the keypad connector (P1)
KPXXX:02
Armed status indicator (Red)
KPXXX:03
Disarmed status indicator (Green)
KPXXX:04
Beeper output
KPXXX:05
Confidentiality mode
Replace 'xxx' with the appropriate address of the module that you are programming.
Example Open Collector Output Connection (P1):
Keypad Terminal
Connection
1K5 OHM
LED
+12V AUX
Z2
P1
Z1
NB
+
NA
-
Warning:
The open collector output can switch to a maximum capacity of 50mA. Exceeding this amount will
damage the output.
PRT-TS50 | LCD Touchscreen Keypad | Installation Manual
13
