3.2.6 ADR Link Check Period– linkcheck period
Command Input:
linkcheck period
Compatible:
Device Firmware Versions > 1.2
Description:
Determines the number of unconfirmed packets between link checks when using ADR. Typically,
this is set automatically and should not need to be changed.
3.2.7 LoRaWAN Default Data Rate – lora data rate
Command Input:
lora data rate
Compatible:
All Device Firmware Versions
Description:
Manage the device’s default data rate. Used when ADR is not enabled.
Command
Type
Syntax Used
Example Command
Response
Type
Example Result of Command
Get
linkcheck period
linkcheck period
<period>
64
Set
linkcheck period
<period>
linkcheck period
0
<period>
linkcheck period 200
200
Parameter Type
Description
<period>
Number
Number of unconfirmed packets between link checks.
Command
Type
Syntax Used
Example Command
Response
Type
Example Result of Command
Get
lora data rate
lora data rate
<data rate>
2
Set
lora data rate
<data rate>
lora data rate
0
<data rate>
lora data rate 1 1
Parameter
Type
Description
<data rate>
Number
LoRaWAN Data Rate, where 0 is minimum (LoRa spreading factor 12).
Maximum value is region specific.
ICT INTERNATIONAL
Operation Manual
EF-NODE
12