![background image](http://html1.mh-extra.com/html/ics/xmc-a825-16/xmc-a825-16_user-manual_3532771026.webp)
XMC-A825-16 ARINC-825 16 Channel XMC / CANFlight-16 User's Manual REV C
Document: TP2216-901_Users_Manual.pdf
Page 26 of 39
© Innovative Control Systems
Project:
TP2216-901
Author: K. Jacobson Date: 11.05.2019
Rev.: C
Tag
Meaning
Format Example
Description
BR0=
BR1=
CAN Channel
Bridge Switch
BR1=0
Activates/deactivates the bridge function of the
specified CAN channel. If both channels have the
bridge function activated, all CAN messages are
transferred between the channels in both
directions. The following settings are valid and
specify the state of the readback (0 = inactive, 1
= active):
BRx=0
BRx=1
Note that the bridge function is currently not
implemented in the XMC-A825-16 firmware.
FDR=
Flight Data
Recording Mode
FDR=RUN
Activates the Flight Data Recording Mode. The
following settings are valid:
FDR=RUN
FDR=CAN
FDR=ETH
If RUN is selected, the data recording starts
immediately after power-on and stops on power-
off. A new recording file is created each time
when the seconds specified through the “RFT=”
tag have elapsed.
If CAN is selected, the recording process is
controlled through the TOP_MARKER
CANaerospace message, either on CAN channel
1 or 2.
If ETH is selected, the recording process is
controlled through the Ethernet interface.
Note
that this mode is currently not implemented in
the XMC-A825-16 firmware.
DRC=
CAN Channel
Recording
Switch
DRC=3
Specifies which CAN channels are recorded
when the Flight Data Recording Mode is active:
DRC=1 (Channel 1 only)
DRC=2 (Channel 2 only)
DRC=3 (Channel 1 + 2)
RFT=
RFT=0060
Specified the time after which a new data
recording file is generated when the Data
Recording is active in the RUN mode, in
seconds, as a 4-digit decimal number in the
range of 0001-9999.
Table 7: XMC-A825-16 Configuration File Tags