Tunnel Master® wbc Installation Guide
Page 2
Tunnel Master® wbc Installation Guide
Page 2
Installation Overview
This document was written for the installation of the Tunnel Master® wbc to assist technicians and
electricians. A thorough understanding of electrical wiring, installation, codes, and safety protocols
is required. Additionally, some familiarity with car wash tunnel equipment and installation is
recommended. No prior experience with the Tunnel Master® wbc (Web Based Controller) is required.
The Tunnel Master® wbc is also known as the WBC. This guide should be supplied to the electrician
prior to the installation of conduit and wiring to ensure the WBC system is installed properly. Faulty
installations are the major cause of system malfunctions. The Tunnel Master® wbc system must be
installed exactly as described in this manual to ensure its reliability and proper operation.
WARNING: Failure to properly install the WBC system will void the warranty.
Innovative Control Systems provides technical support for customers and installers:
1-800-246-3469
Many of the WBC system features were integrated at the request of current car wash operators. We
welcome your feedback and want to assure you that ICS will always remain the industry leader in car
wash controller and management systems.
By reading the information and performing the procedures in this manual, you should be able to
perform the following:
Install the WBC system-level wiring
Install the WBC communications wiring
Troubleshoot problems if they occur
Related Documents
Tunnel Master® wbc User Manual
Version Considerations
This document is Version 11 released February 5, 2020. Version 11 of this document includes content
based on the following ICS software versions:
Controller software version 1.2 B51
Controller software version 1.3 B10 (only available if hardware is compatible)
Completion Time
We estimate that it will take 30 minutes to perform this procedure. Keep all hardware organized.
Hardware Specs
Unit weighs 130 lbs
Hinged panel design measures 32’’ W × 40’’ H × 12’’ D
IP-based tunnel controller capable of handling:
• 192 outputs
• 48 inputs
Graphics display shows the status of all inputs and other tunnel status indicators
Web interface for easy configuration
