manualshive.com logo in svg

ICS PCI-AOB2 Series, User Manual

Share
Download
ICS PCI-AOB2 Series User Manual Download Page 20

Installation        2-1

Chapter 2

Installation

Overview

The software provided with the PCI-AOB2/4/6 Series is contained on either one CD or 
multiple diskettes  and must be installed onto your hard disk prior to use.  To do this, 
perform the following steps as appropriate for your software format and operating system. 
Substitute the appropriate drive letter for your CD-ROM or disk drive where you see  d: or  
a: respectively in the examples below.

CD Installation

DOS/WIN3.x

1)

Place the CD into your CD-ROM drive.

2)

Type

d: [Enter]

to change the active drive to the CD-ROM drive.

3)

Type

install [Enter]

to run the install program.

4)

Follow the on-screen prompts to install the software for this card.

WINDOWS 95/98/2000/NT

1)

Place the CD into your CD-ROM drive.

2)

The CD should automatically run the install program after 30 seconds.  If the 
install program does not run, click START | RUN and type 

d: install

, 

click OK or press [

Enter]

.

3)

Follow the on-screen prompts to install the software for this card.

Directories Created on the Hard Disk

The installation process will create several directories on your hard disk.  If you accept the 
installation defaults, the following structure will exist.

[CARDNAME]

Root or base directory containing the SETUP.EXE setup program used to help you 
configure jumpers and calibrate the card. 

DOS\PSAMPLES:

A subdirectory of  [CARDNAME] that contains Pascal samples.

Summary of Contents for PCI-AOB2 Series






































Reviews:

No comments

Brands by name

Popular brands

Load more brands