background image

 

Page 24 

Selecting FACTORY RESET will take you to a choice of reset options. 
 

Full Reset 

A full factory reset will erase all stored NAVTEX messages and Navigation log 
data. All menu options will return to the factory default. However, any changes 
that you have made to the station database will 

not

 be effected by the full reset. 

 
Partial reset 

A partial reset will return all menu options to the factory default. However, any 
changes that you have made to the station database will 

not

 be effected by the 

partial reset. 
 
Should it be necessary to restore the full station database then this requires a 
reload of the program software using the ICS NAV6 programming kit (ICS Part 
Number 6100.00) 
 
Contact your supplier for further information. 

 
Setup Mode, NAVTEX View, Options Page 

The [Setup Mode

NAVTEX View

Options 

Page] shows general settings for NAVTEX 
operation such as Antenna, Display, Sound and 
Print settings.  
 
Use the UP and DOWN keys to select the setting 
that you wish to edit. Use the LEFT and RIGHT 
keys to change the setting. 
 
 
 
 
 
 
 
 
 

Summary of Contents for Nav6





















































Reviews: