Auto Sentry® Petro - Installation Guide
20
Molded Plastic Installation
11.
On the back of the Auto Sentry® Petro, line up the three metal tabs at the top to the holes in
the gray roto mold #3. See Figure 12.
Figure 12. Three metal tabs on backside of the Auto Sentry® Petro
12.
Install (3) of the #8 -11 x 1-1/4” and (3) of the #8 Flat Washers from (Bag D & I)
across the top on the back of the Auto Sentry® Petro. See Figure 12.
13.
Open front door of the Auto Sentry® Petro.
14.
Locate the blue roto mold #4 and then place it on the front of the gray
roto mold #3. See Figure 13.
Figure 13. Blue Roto Mold #4 (front)
15.
At the top of the blue and gray molds, you can line up the screw holes. See Figure 14.
NOTE:
The (4) silver screw holes across the top of Roto Mold #4 are for optional sign attachment.
Contact ICS Marketing for custom toppers for an additional fee.