Auto Sentry® Petro - Installation Guide
18
Molded Plastic Installation
6.
Locate the gray full-size Auto Sentry® Petro roto mold #3. See Figure 10.
Figure 10. Roto Mold Plastic #3 (Front view)
7.
On the Auto Sentry® Petro, open the front door to perform the next step.
8.
Remove the plastic keeper on the sonic sensor. You will need to put this back on after the
plastics are completely installed.
9.
Place the Roto Molded Plastic #3 over the Auto Sentry® Petro metal core.