background image

NOTES:

1. DIMENSIONS ARE FOR REFERENCE ONLY

2. DESCRIPTION: UNINTERRUPTIBLE POWER SUPPLY – LIFELINE SERIES

3. SPECIFICATIONS:
     WEIGHT: 120 LBS. PLUS EXTERNAL BATTERIES AND RACK
     INPUT POWER DC: 48VDC NOMINAL, 55AH BATTERY
     INPUT POWER AC, 60HZ, 8AAC, NOMINAL
     REGULATED OUTPUT POWER: 120VAC, 60HZ, 5.0AAC
     OUTPUT WAVE FORM: SINUSOIDAL 5% MAX TOTAL HARMONIC DISTORTION
     CHARGING CURRENT: 2ADC
     EFFICIENCY: UP TO 85% NOMINAL LINE, BATTERY VOLTAGE AND FULL LOAD

INPUT/OUTPUT CONNECTIONS: NUMBERED 18 POSITION TERMINAL STRIP
INPUT/OUTPUT CONNECTION ACCESS: 4 DUAL-CONCENTRIC CONDUIT HOLES
OPERATING TEMPERATURE: 10 – 40 DEGREES C
OPERATING HUMIDITY: 0 – 85% NON-CONDENSING
STORAGE TEMPERATURE: 0 – 65 DEGREES C

4. CONTROLS:

BATTERY CIRCUIT BREAKER
INVERTER ON PUSHBUTTON SWITCH

INVERTER OFF PUSHBUTTON SWITCH

INVERTER CAN BE SWITCHED ON AND OFF WHEN INPUT 120VAC POWER IS NOT PRESENT. 
WHEN INPUT 120VAC POWER IS PRESENT, OUTPUT 120VAC POWER IS ALWAYS PRESENT.

5. INDICATORS (ALL GREEN):

AC INPUT – INDICATES AC INPUT POWER IS PRESENT
BATTERY – INDICATES DC POWER IS PRESENT (FROM BATTERY OR CHARGER)
AC OUTPUT – INDICATES AC OUTPUT POWER IS AVAILABLE

6. BATTERY BACKUP TIMES:

4 HOURS AT 2.5AAC POWER OUTPUT
2 HOURS AT 5.AAC POWER OUTPUT

13

Summary of Contents for 9300057















Reviews: