©2017 ICS - Blount Inc, Specifications subject to change without notice. REV19JUNE2017 P/N 598901
83
695XL SERVICE MANUAL
24.8
Testing the fuel tank breather.
Attach the pressure gauge to the fuel
tank plug. Plug the fuel line at the
carburetor end. Pressurize the tube to 4.5
psi (0.3 bar).
The pressure should reduce to nearly 0
psi (0 bar) over a period of 3 seconds.
24.10
Inspect the fuel purge circuit.
Inspect the purge bulb for leaks or
damage. Replace if damaged. See fuel
tank section.
24.9
If the pressure does not release,
disassemble or replace the breather.
24. FUEL SYSTEM
24.11
Inspect fuel purge lines and one way
purge valve for leaks or damage. The
arrow is the purge flow direction.
Replace if damaged. See fuel tank
section.
