©2017 ICS - Blount Inc, Specifications subject to change without notice. REV19JUNE2017 P/N 598901
3
SERVICE MANUAL USE
Service Manual Use
This manual contains all the technical information necessary for
carrying out repairs on the 695XL power cutter. For safe, efficient
work, it is of prime importance that the values indicated be adhered
to. Routine periodic maintenance is covered in the operator’s manual
included with each power cutter.
General Service Rules
• Always use the right tools for the job, otherwise components may be
damaged.
• Use a plastic dead blow mallet to separate parts attached solidly to
each other.
• Mark mating parts as a reassembly reference.
• Keep component parts together as a group. Assemble screws and
nuts into appropriate subgroups.
• When reassembling, clean all parts carefully, lubricate moving parts
and replace all oil seals, o-rings, gaskets, washers and self-locking
nuts.
•
For best results, use only original ICS
®
replacement parts.
General Recommendations
• Some procedures in this manual require the use of special tools.
These are noted in the service manual.
• Detailed carburetor maintenance and overhaul information is
available in Walbro’s Diaphragm Carburetor Service Manual.
Walbro can be contacted at http://www.walbro.com or by calling
1.520.877.3000.