© 2015 ICS®, Blount International Inc. Specifications are subject to change
without notice. REV071315 F/N 577452
695XL OPERATOR MANUAL
27
PRE-OPERATION SAFETY CHECKS
Operation
Perform the following safety checks each day to be sure that the safety features
designed into the saw are functioning properly. If any items are excessively worn or
damaged, replace before use.
•
With on/off switch locked in the “STOP” position, without starting saw and with
decompression valve depressed, pull starter rope slowly and inspect for
fraying, wear and abrasion
•
Assure vibration isolators are intact
•
With engine running and without depressing thottle trigger lockout, pull throttle
trigger and assure continuous chain movement does not occur
•
Verify at engine idle speed that the chain does not move
