© 2015 ICS®, Blount International Inc. Specifications are subject to change
without notice. REV071315 F/N 577452
695XL OPERATOR MANUAL
41
C
hain Tensioner
C
hain Tensioner
Maintenance
STARTER RECOIL HOUSING ASSEMBLY
•
To reattach the starter cover assembly, first pull the
starter cord out, then hold the starter recoil housing
against the crankcase
•
Slowly release the starter cord to enable the pulley
to fit between the pawls
•
Insert and tighten the screws. Use blue Loctite®
#242
CHAIN TENSIONER
The chain tensioner can become clogged with concrete slurry during cutting.
•
After each use thoroughly flush the chain tensioner with water and apply a
liberal amount of waterproof grease covering the chain tensioner screw
NOTE: The chain tensioner is located on the side cover.
