43
Copyright © 2005 ICS, Blount Inc.
633GC SHOP MANUAL
15
This section covers the removal,
inspection, and installation of
the ignition coil. Removal of
the starter is required. Refer to
section 8 if necessary.
5. Remove starter.
5.2 Remove starter flywheel shroud by
unhooking wires.
5.3 Remove ignition coil screws, wave
washers and plain washers.
5.4 Remove ignition coil.
5.5 Inspect.
A Look for cracked/missing insulation.
B Clean flywheel magnets and coil if
rusty.
15. IGNITION COIL