Manual Number: 41209-004-1
Page 2-12
586MBH Manual
Parallel Port DMA
This option is only available if the setting for the Parallel Port Mode option is ECP.
The settings are 0,1,or 3. The default setting are 3.
Refer to Hardware Jumper settings on Chapter one for JP 21 and JP22 when setting for these
options.
Parallel Port IRQ
The settings are 5 and 7. The Default setting are 7.
Onboard PCI IDE
The settings are Disabled, Primary, Secondary, Both. The Default setting is Primary.
Section 2: Utility
The following icons appear in this section:
Detect IDE and Language
Detect IDE
This option allows the detection of an IDE hard drive automatically.
Language
Only English is supported
Section 3: Security
AMIBIOS Password Support
Three icons appear in this part of the WINBIOS Setup screen:
•
Supervisor,
•
User,
•
Anti-Virus.
Two Levels of Passwords
Both the Supervisor and the User icons configure password support. If you use both, the Supervisor
password must be set first. The system can be configured so that all users must enter a password
every time the system boots or when WINBIOS Setup is executed, using either or both the Super-
visor password or User password.
