manualshive.com logo in svg

ICS 586MBH Series, Product Manual

Share
Download
ICS 586MBH Series Product Manual Download Page 20

Manual Number: 41209-004-1

Page 1-12

586MBH Manual

Table 1-10:   Control Panel Connectors

Installing Peripheral Cables

Begin with the top of the 586MBH system working left to right.

Now it is a good time to install the internal peripherals such as floppy and hard disk drives. Do not
connect the power cable to these peripherals as it is easier to attach the bulky ribbon cables before
the smaller power connectors.  If you are installing more than one IDE drive double check your
master/slave jumpers on the drives. Review the information supplied with your drive for more
information on this subject.

Connect the floppy cable (not included) to the system board. Then connect remaining ends of the
ribbon cable to the appropriate peripherals.

Finally, connect the IDE cable (not included) to the system.  Then connect remaining ends of the
ribbon cable to the appropriate peripherals. This concludes the hardware installation of your 586MBH
Industrial system.  Now it is a good time to re-check all of the cable connections to make sure they
are correct.  It is also a good idea to label each of the external peripheral connectors - COM1,
COM2, Mouse and Parallel.

Connector

Description

J5

PS/2 mouse

J6

Keyboard

J7

Aux. Keyboard

J9

Floppy

J10

Serial 2

J11

Serial 1

J12

Parallel

J15

Reset

Connector

Description

J16

Speaker

 1-signal/2-key/3-ground

J17

IDE LED

  1-positive/2-signal

J18

Power LED / KBD.

Lock  1-LED/2-key/3-ground/4-5V

J19

CPU Fan

      1&3-ground/2-12V

P1

AT Power

P2

Optional 3.3V Power Supply

IDE 1

PCI IDE

IDE 2

PCI IDE

Summary of Contents for 586MBH Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands