Chapter 1: Introduction
Manual Number: 41209-004-1
Page 1-9
1. Gently place the SIMM into the desired socket at 30-45 angle.
2. Then gently rotate or rock the SIMM into an upright position. Never force a SIMM into its
socket.
3. Double check the notch and gently rock it into place. If properly installed, the SIMM will
"click"
Figure 1-3: SIMM Installation
Figure 1-4: Memory Modules Socket Locations
CPU Installation
The 586MBH currently supports the following CPUs:
•
Intel P54C Pentium 75, 90, 100, 120, 150, 166, or 200MHz.
•
Cyrix 6x86 100,120MHz.
SM1
SM2
SM3
SM4
Bank 0
Bank 1
WARNING
Improper installation of the CPU may cause permanent damage to both the system board
and the CPU -- Void of warranty. Always handle the CPU by the edges, never touch
the pins. Always use a heatsink and CPU fan.
"C L I C K "
L O C K