30
6 Set up with the display and adjustment module
WIKA Operating Instructions - Process pressure transmitter IPT-2x
6.4 Parameter adjustment - Extended adjustment
For technically demanding measuring points, you can carry out
extended settings in "
Extended adjustment
".
The main menu is divided into five sections with the following func
-
tions:
Setup:
Settings, e.g., for measurement loop name, application, units,
position correction, adjustment, signal output
Display:
Settings, e.g., for language, measured value display, lighting
Diagnosis:
Information, e.g. on instrument status, pointer, measure-
ment reliability, simulation
Additional adjustments:
PIN, date/time, reset, copy function
Info:
Instrument name, hardware and software version, date of manu-
facture, sensor features
Note:
For optimum adjustment of the measuring point, the individual sub-
menu items in the main menu item "
Setup
" should be selected one
after the other and provided with the correct parameters. If possible,
go through the items in the given sequence.
The submenu points are described below.
6.4.1 Setup
In the menu item "
Sensor TAG
" you edit a twelve-digit measurement
loop designation.
You can enter an unambiguous designation for the sensor, e.g. the
measurement loop name or the tank or product designation. In digital
systems and in the documentation of larger plants, a singular desig-
nation must be entered for exact identification of individual measuring
points.
The available digits include:
•
Letters from A … Z
•
Numbers from 0 … 9
•
Special char, -, /, -
Main menu
Measurement loop name
